How To Make A Homemade Stylus !!!

By Anonymous -

Step 1: 

What you will need in order to make a homemade stylus is :
Tin foil
A pin

Step 2: 

Take every thing out of the pen and grab some tin foil and wrap it around the pen like shown above.
#surface computing
#capacitance touch screen
#multitouch
#stylus
#diy
 

Comments

  1. Unknown9 October 2021 at 01:09

    It's better to go here to know what is better, Arduino IDE or PlatformIO

    ReplyDelete

Post a Comment

Popular posts from this blog

The power of Bluetooth 4.0

By -
Image
Bluetooth, once trumpeted as the ultimate convenience, quickly proved a headache with plenty of pairing problems and inexplicable connection snafus. Bluetooth 4.0, the newest version of the technology, is about to change all that. The bad Bluetooth rep I personally use Bluetooth daily, and love it. My trusty   LG BHS-700s   works like a charm. For others, however, living with this technology can be frustrating. Often users are asked to enter annoying passwords before linking devices, and sudden reception drops or other software glitches make Bluetooth feel more painful than fun. Honestly I believe the bad old days of Bluetooth are behind us, especially with Bluetooth 4.0, AKA   Bluetooth Smart Ready , on the edge of mass adoption. Already available in the   Motorola Droid Razr   and   Droid Razr Maxx   smartphones plus Apple's   iPhone 4S , Bluetooth 4.0 is expected to hit more handsets and all manner of accessories this year. High-end hands...
Read more

How to hack your xbox 360 completely

By Anonymous -
Image
So you want to hack your 360. Have no idea where to start? This thread should give you a general idea on what you can do with your 360. Lets get started. First of all you'll need to determine the age of your console. This will give you a general idea of what hack you can apply. On the back of the 360 there is a sticker near the AV port (Phat*&Slim*) On that you'll find the MFR date as well as the Console Serial and Product ID. Determining the age of the 360 ​ ​ You'll need to write down your MFR date. This will roughly tell you what board you have in your 360. Xenon: 2005 - 2007 203w power supply, can be JTAGged and RGH'd (14699 only) & R-JTAGged. Zephyr: 2007 - 2008 203w power supply, can be JTAGged and RGH'd (Hard to achieve) & R-JTAGged. Opus: Only from RRoD Repairs from MS (rare revisions) 203/175w power supply, can be JTAGged and RGH'd & R-JTAGged. Falcon: 2007 - 2009 175w power supply, can be JTAGged and ...
Read more

Wii Remote IR Camera Hack with Arduino Interface

By Anonymous -
Image
Step 1: Extract the Wii IR camera You'll need a Wii remote or "Wiimote" to start with. Normally they are about $40, in the end that is not too bad for a pretty awesome sensor. Otherwise you can check out ebay or elsewhere for used or broken Wii remotes. You'll need to rip apart the case. It has some crazy three pronged screws. I didn't want to completely trash the case so I made a small tool to take it apart. Now you need to desolder the 8 pins and the 2 struts holding the camera on the board. I used some desoldering braid. It wicks the solder away and makes it easy to get the camera out. Be careful, don't break the camera! You might want to keep the rest of the parts. You might be able to scrap other parts. Also, If you decide later to use the Wiimote again, you could always put the camera back in. Step 2: Interface Circuitry We'll need a small circuit to interface the IR camera to the arduino. I got all m...
Read more